Skip to main content

ENFit is here!

After years of waiting, stressing, and anticipating, ENFit is FINALLY rolling out! Yes, I used an exclamation point, and yes I meant it in a happy way. I can't be the only one that's tired of adapters, right?? I first heard of ENFit in early 2013 and at that point, it was supposed to roll out in 2014. Here we are in the 4th quarter of 2016 and we are FINALLY getting ENFit supplies for both ends of the connection, and all I have to say is it's about time!

A lot of people are still unsure of what ENFit is and why the change is happening. For more about that, you can read here, here, and here. The condensed version is that there have been serious injuries and deaths due to medical misconnections, so all medical device connections are changing in phases to be incompatible with each other. ENFit is the name of the enteral (feeding tube) connection. The process started 10 years ago, and although this {ridiculously long} transition phase is a pain in the rear, the end goal is safer connections for everyone.

After many, many delays, ENFit extension sets are now making their way through the supply chain, as are the updated Moog EnteraLite Infinity pump bags. The pump bags had been released in 2014 but there were some issues with the purple ENFit connector cracking, so Moog temporarily went back to the red Christmas tree connectors while they reworked their ENFit connectors to address the problems. Now they're back, and with a slightly different design and (hopefully) improved material that will not crack.

So far, extensions from Halyard and AMT are the only ones I have personally tried out. I had the opportunity to try Halyard's ENFit extension sets back in May. While I do still worry a little bit about the second port being able to pop open and I think I'd feel more comfortable with a cap that twists on, I really liked the ENFit-to-ENFit connection. We used the same extension for 10 days and did not have any med port accidents, accidental dislodgements of any kind, no disconnections between the pump bag and the extension, and really no problems at all with it. Being realistic, it takes more than 10 days to have problems come up, but I felt pretty optimistic about ENFit connections between feeding pumps and extensions after testing out the MicKey ENFit extension. Here's a picture of the ENFit end:


We were surprised (mostly in a good way) to have these new AMT hybrid ENFit extensions show up in our supply delivery this month, along with the new ENFit Moog Infinity bags. They are a hybrid extension, meaning they have an ENFit port and a non-ENFit port. There has been some confusion as people have started receiving these extensions. The white piece where the med port used to be is attached and is not removable. That part is the ENFit port.
I saw these hybrid extensions at a conference I attended in May and was a little confused as to why they would make the med port ENFit rather than the feed port since ENFit pump bags were available already but syringes were not, so I asked their reps. I don't remember the exact details but it has to do with regulations that went into place in July. The manufacturer wanted to provide people with a combination extension but in order to be in compliance with regulations, this was the way they had to do it.

Here is how the hybrid extension works with ENFit Moog pump bags (and Kangaroo Joey pump bags also, I just don't have one of those):
We (Feeding Tube Awareness) still recommend tightening the connection to fingertip tight and not twisting harder than that to avoid damaging either part of the connection, but I noticed that the design changes Moog made to the purple connector makes it so you can only twist it so far. Their previous design made it really easy to overtighten and crack the connector, but this one doesn't seem to work that way.


Syringes and Adapters
AMT has put a lot of effort into helping consumers through the ENFit transition. They have a whole line of adapters available to help us all use the supplies we have stockpiled, and to be able to use our current supplies with the new supplies we are receiving from our supply companies while the transition rolls out. {and no, they're not paying me to say that, I just genuinely appreciate the efforts that AMT makes as a company to serve the needs of consumers}

Since ENFit syringes are not yet being distributed en masse, AMT is including a slip tip syringe adapter with the hybrid extension sets. This is what it looks like:

To use the adapter, you twist the adapter into the ENFit port on the extension until it is "fingertip tight" and then give meds as usual. Simple enough, right?

If the slip tip syringe you're using fits into the syringe adapter, then yes, it is that simple. 

Buuuuut some of our slip tip syringes don't fit. Like that little brown 1 ml syringe on the right. It is the exact same diameter as the adapter and it does not fit. Nor do these 10 ml oral syringes that our pharmacy gives us, which I use for water flushes after meds sometimes. 

So what's a girl to do when the syringes don't fit the adapters?? Or if the adapters crack, which we have been hearing reports of on Feeding Tube Awareness. (If you have an adapter crack, please contact AMT's customer service department and let them know. They are very responsive to consumer feedback and they are aware of this problem and want to fix it!)

Our solution is to just not use the adapter. It so happens that 1 ml, 3 ml, and oral tip syringes fit directly into the feed port, as do cath tip syringes. We've actually been giving all our meds this way for a couple years now because we were tired of dealing with med ports.

I didn't realize the oral tip syringes fit directly into the feed ports until we were inpatient once and I saw a nurse give one of the meds that way. The tip of an oral syringe is longer than the tip of a slip tip syringe, so it actually does fit snugly into the feed port.


I know my opinion will not be popular with some but I really am happy to have ENFit extension sets and pump bags so we don't have to use adapters for that connection anymore. Since we're using the feed port to do meds anyway and now we're using the med port to feed through, giving meds is quick & easy.
For doses that are 1 ml or less, we use 1 ml syringe. For doses from 1-3 ml, we use a 3 ml syringe, and anything more than 3 ml, we use a 10 ml oral tip syringe. We also give things that have to be mixed with water, like powdered PPI packets and probiotic powder, so we use a regular cath tip syringe for those. This may not work for everyone but it has made giving meds much easier for us while we wait for ENFit syringes to reach the supply chain, and hopefully it will help someone else too!

(**Note** I don't have any information about the timeline for ENFit syringes, or how they will be distributed but if and when I hear more, I will share that information as well.)

Comments

  1. Hmm....most of my son's med doses are over 5 mL, so we use a lot of 10-12 mL syringes that don't fit in the feed port. It seems like the orange NeoMed syringes work ok with the med port adapters, though?
    We just got our monthly supplies today and no ENFit extensions yet (we get the AMT 12-inch clear y-ports), so I guess I have at least another month :)

    ReplyDelete

Post a Comment

All comments will require approval from blog owner prior to being published.

Popular Posts

Adhesives Part 1: Adhesives & Taping Techniques for NG tubes

This series has been a long time in the making. Back when Raya got her NG tube, I had no idea there were so many different adhesives on the market. At the hospital, they had used some kind of fabric tape in a box that had to be cut with scissors and that was the ONLY thing we accidentally left at the hospital. Raya caught her little pinky finger on the tube a couple days after we got home and the only medical tape I had ended up bringing home was Durapore. This tape is VERY sticky, very strong, and definitely not the best option for the tender little cheek of a 2 month old baby. A couple days later, we went to the GI doctor and the nurse saw the tape and told me that Duoderm would be much gentler on her skin and she gave me a couple of 6x6 sheets to try out.
That was the beginning of our trial-and-error process of figuring out which types of adhesives were better for all of the different things we used them for. This will of course NOT be an exhaustive review of every adhesive out the…

Sensory Processing Disorder: How to Make a Weighted Blanket

Lately I've been toying with the idea of making Raya a weighted blanket. She loves heavy things and has a lot of sensory seeking behaviors in regards to proprioception. Translation: she craves sensory input that helps her to gain awareness of where her body is in space, and it takes stronger than average input for her to get the feedback that her body is craving. (or at least that's how I understand it :) She seeks out "heavy work" activities, like carrying heavy things, pushing heavy things around on the floor (chairs, full laundry baskets, etc), and anything that gives heavy resistance to her muscles and joints. Lucky for us, carrying her backpack is a good heavy work activity because the poor kid gets to do that for a few hours a day. :)
The idea behind a weighted blanket and other heavy work activities is that when the child gains greater body awareness through proprioceptive input, the nervous system can be calmed and the need for constant fidgiting, moving, jump…

Feeding Tube Terminology: G tube words

One of the many things I didn't have a clue about before Raya got her G tube was the fact that there are LOTS of different kinds of G tubes, all with similar but different features & functions. Some of the terminology that was tossed around in the beginning was very confusing. When I met with the surgeon to pick out a button for when Raya's initial tube was ready to be changed, they pulled a bunch of tubes out of a cupboard, put them down on the table in front of me and said, "What kind do you want?" I had NO idea what to pick, all I knew was that anything would be better than what we had at that point.

Here are a few things I wish someone could have explained to me before Raya got a G tube:

1. What the heck does PEG mean?
PEG stands for percutaneous endoscopic gastrostomy. In other words, a gastrostomy tube is placed through the abdominal wall using an endoscope to visually guide the surgeon to the best location to place the tube. The term PEG is used to refer to …